LCP-05007ê17
(12)Handling Precautions
12-1) Insertion and taking out of FPCs
Be sure insert and take out of the FPC
into the connector of the set after turning off the power
supply on the set side.
12-2) Handling of FPCs
The FPC for LCD panel shall be bent only slit portion. The bending slit shall be bent uniformly
on the whole slit portion with bending radius larger than 0.6mm ,and only inner side (back side
of the module). Don’t bend it outer side (display surface side).
Don’t give the FPCs too large force, for example, hanging the module with holding FPC.
12-3) Installation of the module
On mounting the module, be sure to fix the module
on the same plane. Taking care not to warp or
twist the module.
12-4)Precaution when mounting
(1)
If water droplets and oil attaches to
it for a long time, discoloration
and staining occurs. Wipe them off
immediately.
(2)
Glass is used for the TFT-LCD panel and touch panel. If
it is dropped or bumped against a hard object, it
may be broken. Handle it with sufficient care.
(3)As the CMOS IC is used in this module, pay attention to static electricity when handling it. Take a
measure for grounding on the human body.
12-5)Others
(1)
The liquid-crystal is deteriorated by ultraviolet rays. Do not leave it in direct sunlight and strong
ultraviolet rays for many hours.
(2)
If it is kept at a temperature below the rated storage temperature, it becomes coagulated and the panel
may be broken. Also, if it is kept at a temperature above the rated storage temperature, it becomes
isotropic liquid and does not return to its original state. Therefore, it is desirable to keep it at room
temperature as much as possible.
(3)
If the LCD breaks, don’t put internal liquid crystal into the mouth. When the liquid crystal sticks to the
hands, feet and clothes, wash it out immediately.
(4)
Wipe off water drop or finger grease immediately. Long contact with water may cause discoloration or
spots.
(5)
Observe general precautions for all electronic components.
(6)
VCOM must be adjusted on condition of your final product. No adjustment causes the deterioration for
display quality.
相关PDF资料
相关代理商/技术参数
LQ039Q2DS02
制造商:SHARP 制造商全称:Sharp Electrionic Components 功能描述:Color TFT-LCD Module(Handheld PC)
LQ039Q2DS54
制造商:SHARP 制造商全称:Sharp Electrionic Components 功能描述:Color TFT-LCD Module(Handheld PC)
LQ042T5DZ11
功能描述:TFT 显示器 & 附件 4.2" WQVGA TFT CID Cluster
RoHS:否 制造商:Sharp Microelectronics 产品:Displays 对角线:1.35 in 分辨率:96 x 96 模块大小 - 宽x高x厚:28.2 mm x 32.34 mm x 1.4 mm 观察区域 - 宽x高:24.192 mm x 24.192 mm 附加的触摸屏:No 接口:Serial 背光: 背景色: 电源电压:3 V 工作电流: 工作温度范围:- 10 C to + 60 C 封装:
LQ043T1DG01
功能描述:TFT 显示器 & 附件 4.3" 480x272 ASV TFT LCD RoHS:否 制造商:Sharp Microelectronics 产品:Displays 对角线:1.35 in 分辨率:96 x 96 模块大小 - 宽x高x厚:28.2 mm x 32.34 mm x 1.4 mm 观察区域 - 宽x高:24.192 mm x 24.192 mm 附加的触摸屏:No 接口:Serial 背光: 背景色: 电源电压:3 V 工作电流: 工作温度范围:- 10 C to + 60 C 封装:
LQ043T1DG02
制造商:SHARP 功能描述:LCD DISPLAY TFT 4.3" 制造商:Sharp Microelectronics Corporation 功能描述:LCD DISPLAY, TFT, 4.3" 制造商:Sharp Microelectronics Corporation 功能描述:LCD DISPLAY, TFT, 4.3"; Backlighting Color:White; LCD Display Type:TFT; Pixel Pitch (H x W):0.198mm x 0.198mm; Display Mode:Transmissive; Interface Type:Digital; Viewing Area (H x W):53.856mm x 95.04mm; Supply Voltage:3.3V ;RoHS Compliant: Yes
LQ043T1DG28
功能描述:TFT 显示器 & 附件 4.3" TFT 480x272xRGB 3.3V LED Backlight RoHS:否 制造商:Sharp Microelectronics 产品:Displays 对角线:1.35 in 分辨率:96 x 96 模块大小 - 宽x高x厚:28.2 mm x 32.34 mm x 1.4 mm 观察区域 - 宽x高:24.192 mm x 24.192 mm 附加的触摸屏:No 接口:Serial 背光: 背景色: 电源电压:3 V 工作电流: 工作温度范围:- 10 C to + 60 C 封装:
LQ043T1DG29
功能描述:TFT 显示器 & 附件 LCD TFTmodule480x272 3wire24bit interface
RoHS:否 制造商:Sharp Microelectronics 产品:Displays 对角线:1.35 in 分辨率:96 x 96 模块大小 - 宽x高x厚:28.2 mm x 32.34 mm x 1.4 mm 观察区域 - 宽x高:24.192 mm x 24.192 mm 附加的触摸屏:No 接口:Serial 背光: 背景色: 电源电压:3 V 工作电流: 工作温度范围:- 10 C to + 60 C 封装: